One-Piece Flagpoles (External Halyard) (ALL FLAGPOLE PRICES ARE F.O.B. FACTORY)
Flags International® uses only the highest quality, U.S. manufactured, aluminum tapered one-piece flagpoles. These External Halyard Flagpoles use the traditional method for raising & lowering the flag and have a brilliant satin finish. Flagpoles with a diameter up to 4 inches come complete with a 2 inch stationary truck, a gold aluminum ball, cast aluminum cleat, 1 pair of chrome flag snaps, solid braided nylon or polypropylene halyard, and a PVC ground sleeve. Commercial flagpoles with a diameter of 5 inches and larger include a standard revolving truck, a spun aluminum flash collar, and a corrugated steel ground sleeve with a grounding spike. Upgrades such as cast a flash collar, heavy-duty revolving truck with sealed bearings, cast Ball/Truck assemblies, cleat covers, and snap covers are available. Other finishes, including Duranodic bronze, clear anodized, and powder coat are also available as a special order. Additional charges apply to all upgrades and special finishes. The wait for a special finish flagpole may be longer than that of a satin finished flagpole. If you don't see what you are looking for here, please give us a call or e-mail with your question.
These poles are seamless T-6063 aluminum finished deep luster and gracefully tapered. Components, or accessories, are of cast or spun aluminum. Flagpoles of 40 feet or longer are made in two or more pieces. Shorter poles may be purchased in two pieces upon request.The strength of the pole being purchased is an important factor - Carefully consider this issue.
1. Includes cast aluminum cleat, braided nylon or polypropylene halyard, chrome snaps, stationary cast aluminum truck, gold colored aluminum ball and PVC Ground Sleeve; flash collar, revolving truck and snap covers are available for an extra charge.
2. Includes flash collar, cast aluminum cleat, braided nylon halyard, chrome snaps, revolving cast aluminum truck, gold colored aluminum ball, and corrugated steel ground sleeve with grounding spike. A heavy duty revolving truck, snap covers, and heavy-duty flash collar are available for an extra charge and may be a cost effective option for you.
Giant Outdoor Eagle Finial Aluminum gold-finished eagle finial. 1-1/4" thread accommodates all poles listed above except tailgater. 15" wingspan.
NAME
$115.00
Giant Outdoor Eagle Finial
Outdoor Ball Finials Aluminum, gold anodized ball finials. 1-1/4" thread accommodates all poles listed above except tailgater. Available in different finishes upon request, call for details.
3"
4"
5"
6"
8"
10"
12"
$20.00
$28.00
$32.00
$39.00
$72.00
$130.00
$150.00
Cleats Used to tie rope around. Cast aluminum, stainless steel, and nylon available.
NAME
LENGTH
$4.00
(A) Aluminum Cleat
4"
$9.90
(A) Aluminum Cleat
6"
$14.00
(A) Aluminum Cleat
9"
$4.00
(B) Nylon Cleat
4"
$4.00
(C) Stamped Steal Cleat
4-1/2"
Dock Mounts
Aluminum dock-mounts to mount your in-ground flagpole to a deck, post, dock, etc. Comes with PVC adapters for multiple diameters.
NAME
$70.00
(A) Dock-Mount
$70.00
(B) Deck-Mount
$75.00
(C) Post-Mount
Drive-Over Base Aluminum drive-over base is ideal for camping and tailgating. Comes with PVC adapters for multiple diameters.
NAME
$80.00
Aluminum drive-over base
Flag Snaps & Covers
Standard snaps in nylon, and brass or cast chrome-plated nickel. Heavy-duty snaps (D) are available in brass coated only.
$2.00
(A) Pair of Nylon snaps
$4.00
(B) Pair of Brass snaps
$4.00
(C) Pair of Chrome snaps
$6.00
(D) Pair of Heavy-duty Brass snaps
$3.00
(E) Standard snap covers (for A, B, or C)
$3.50
(F) Heavy-duty snap covers (for D)
Trucks & Pulleys
Side Mount Pulley (C)
$18.00
Aluminum, 1-1/2"x4"x2-1/2" Nylon Sheave
Small Pulley (D)
$4.00
Aluminum, 1"x2"x1/2" Brass Sheave
Stationary Trucks (A)
$25.00
Aluminum, 2" OD
$30.00
Aluminum, 2-3/8 " OD
$33.00
Aluminum, 3 " OD
$50.00
Aluminum, 3-1/2 " OD
$100.00
Aluminum, 4 " OD
$50.00
Aluminum, 3 " OD Internal Halyard
Revolving Trucks (B)
$70.00
Aluminum, 2" OD Cap Mount
$83.00
Aluminum, 2-3/8" OD Cap Mount
$86.00
Aluminum, 3 " OD Cap Mount
$60.00
Aluminum, Spindle Mount
$170.00
Aluminum, HD Spindle Mount (sealed bearings)
$165.00
Aluminum, Internal Rope
$250.00
Aluminum, HD Internal Rope (sealed bearings)
$70.00
Aluminum, Slipfitter 2-3/8"
$55.00
Aluminum, Slipfitter 3 "
$55.00
Aluminum, Slipfitter 3-1/2 "
Halyard
Braided nylon rope for your flagpole.
Cost Per Foot
Cost Per Spool (500ft)
1/4" White Braided Nylon
$.30
$120.00
5/16" White Braided Nylon
$.40
$160.00
3/8" White Braided Nylon
$.50
$200.00
1/4" White Braided Nylon
(wire-core)
$.80
$320.00
Retainer Rings For flagpoles with internal halyards. Stainless steel aircraft cable ring with nylon beads that inhibits the wind from pulling your flag away from your flagpole.
Cost Per Foot
5" (27" length) Brown or White
$42.00
6" (31" length) Brown or White
$45.00
Counterweight
For internal halyard flagpoles. Constructed from 2" diameter steel, heavily coated with plastisol with plated eyebolts. Keeps rope and retainer ring taught.
Cost Per Foot
3-1/2lb Brown or White Counterweight
$50.00
7lb Brown or White Counterweight
$60.00
Flash Collars Ornamental covering that adds a finished look to the bottom of your flagpole and protects your ground sleeve from the elements.
a 2 inch stationary truck, a gold aluminum ball, cast aluminum cleat, 1 pair of chrome flag snaps, solid braided nylon or polypropylene halyard, and a PVC ground sleeve. Commercial flagpoles with a diameter of 5 inches and larger include a standard revolving truck, a spun aluminum flash collar, and a corrugated steel ground sleeve with a grounding spike. Upgrades such as cast a flash collar, heavy-duty revolving truck with sealed bearings, cast Ball/Truck assemblies, cleat covers, and snap covers are available. Other finishes, including Duranodic bronze, clear anodized, and powder coat are also available as a special order. Additional charges apply to all upgrades and special finishes. The wait for a special finish flagpole may be longer than that of a satin finished flagpole. 
